Stav RAIDu

Martin Balint konferencie at balint.sk
Mon Jul 10 00:39:49 CEST 2006


Zdravim,

tohle je vystup, ktery mi vratil "raidutil -L all".
Jedna se o HW raid-5 na radici Adaptec 2400A, 4x80Gb WD PATA disky.

3 disky jsou zapojeny v raidu, 1 je jako hot-spare.

Na vypisu me zaujala hlaska "Drive in Warn" u disku b3, to, ze cele pole 
je v stavu "Optimal" kdyz b3 'asi' neni v kondici, a ze nikde nevidim 4. 
disk.
Jo, a u b3 je Max Speed 10MHz.

Netusite nekdo, co by to mohlo byt?
Stroj je v serverovne, mam k nemu (momentalne) pouze dalkovy pristup.

Martin

-----------------------------------------------------------------------------------------
#raidutil -L all
RAIDUTIL  Version: 3.04  Date: 9/27/2000  FreeBSD CLI Configuration Utility
Adaptec ENGINE  Version: 3.04  Date: 9/27/2000  Adaptec FreeBSD SCSI Engine

#  b0 b1 b2  Controller     Cache  FW    NVRAM     Serial     Status
---------------------------------------------------------------------------
d0 -- -- --  ADAP2400A      16MB   3A0L  ADPT 1.0  BB0F330067LOptimal

Physical View
Address    Type              Manufacturer/Model         Capacity  Status
---------------------------------------------------------------------------
d0b1t0d0   Disk Drive (DASD) WDC      WD800JB-00JJC0    76319MB   Optimal
d0b2t0d0   Disk Drive (DASD) WDC      WD800JB-32JJC0    76319MB   Optimal
d0b3t0d0   Disk Drive (DASD) WDC      WD800JB-32JJC0    76319MB   Drive 
in Warn

Logical View
Address       Type              Manufacturer/Model      Capacity  Status
---------------------------------------------------------------------------
d0b0t0d0      RAID 5 (Redundant ADAPTEC  RAID-5         152638MB  Optimal
 d0b3t0d0     Disk Drive (DASD) WDC      WD800JB-32JJC0 76319MB   Drive 
in Warn
 d0b1t0d0     Disk Drive (DASD) WDC      WD800JB-00JJC0 76319MB   Optimal
 d0b2t0d0     Disk Drive (DASD) WDC      WD800JB-32JJC0 76319MB   Optimal


Address    Max Speed  Actual Rate / Width
---------------------------------------------------------------------------
d0b1t0d0   50 MHz     100 MB/sec    wide
d0b2t0d0   50 MHz     100 MB/sec    wide
d0b3t0d0   10 MHz     100 MB/sec    wide

Address    Manufacturer/Model        Write Cache Mode (HBA/Device)
---------------------------------------------------------------------------
d0b0t0d0   ADAPTEC  RAID-5           Write Back / --
 d0b3t0d0  WDC      WD800JB-32JJC0   -- / Write Back
 d0b1t0d0  WDC      WD800JB-00JJC0   -- / Write Back
 d0b2t0d0  WDC      WD800JB-32JJC0   -- / Write Back

#  Controller     Cache  FW    NVRAM     BIOS   SMOR      Serial
---------------------------------------------------------------------------
d0 ADAP2400A      16MB   3A0L  ADPT 1.0  1.62   1.12/79I  BB0F330067L

#  Controller      Status     Voltage  Current  Full Cap  Rem Cap  Rem Time
---------------------------------------------------------------------------
d0 ADAP2400A       No battery

Address    Manufacturer/Model        FW          Serial        123456789012
---------------------------------------------------------------------------
d0b1t0d0   WDC      WD800JB-00JJC0   05.0      WD-WCAM9D333243 -X-XX--X-O--
d0b2t0d0   WDC      WD800JB-32JJC0   05.0      WD-WMAM9S304167 -X-XX--X-O--
d0b3t0d0   WDC      WD800JB-32JJC0   05.0      WD-WMAM9S304253 -X-XX--X-O--

Capabilities Map:  Column 1 = Soft Reset
                   Column 2 = Cmd Queuing
                   Column 3 = Linked Cmds
                   Column 4 = Synchronous
                   Column 5 = Wide 16
                   Column 6 = Wide 32
                   Column 7 = Relative Addr
                   Column 8 = SCSI II
                   Column 9 = S.M.A.R.T.
                   Column 0 = SCAM
                   Column 1 = SCSI-3
                   Column 2 = SAF-TE
   X = Capability Exists, - = Capability does not exist, O = Not Supported
#



More information about the Users-l mailing list