smartctl a SSD

Roman Nádhera roman at nadhera.name
Wed Nov 14 14:23:03 CET 2012


dobry den,

mam PC-BSD na pocitaci s SSD diskem a smartctl mi sdeluje takoveto
nechutnosti: (zvlaste ta doba chodu prevysuje o mnoho radu stari vesmiru)
Nejvice by me zajimala teplota a uvedena doba chodu.
Mam sanci to z toho disku dostat? (na jinem pocitaci s normalnim HDD mi
to samozrejme funguje)

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always
      -       0
  9 Power_On_Hours          0x0032   000   000   000    Old_age   Always
      -       173224621877085
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
      -       8
181 Program_Fail_Cnt_Total  0x0032   000   000   000    Old_age   Always
      -       0
182 Erase_Fail_Count_Total  0x0032   000   000   000    Old_age   Always
      -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always
      -       7
225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always
      -       1468
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always
      -       0
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always
      -       0
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always
      -       1468
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always
      -       242
249 Unknown_Attribute       0x0013   100   100   000    Pre-fail  Always
      -       5

SMART Error Log not supported
SMART Self-test Log not supported
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.



More information about the Users-l mailing list