FreeBSD na Dell PowerEdge 1955 .. ?

[David Pasek]

Ahoj,

2008/4/29 martinko <gamato at users.sf.net>:
>  Ahoj,
>
>  Jedna sa o interne pouzitie a dany blade je jedine co momentalne by som
>  mohol dostat k dispozicii.  Preto by ma zaujimalo ako dobre na nom
>  FreeBSD beha.  Ak by si mal teda niekedy chvilku, skus prosim 7-STABLE a
>  napis sem ako to vyzera..  Dik!

Tak jsem na DELL PE1955 vzdalene (pres DRAC konzoli a DRAC virtual CD)
nainstaloval 7.0-RELEASE a vse probehlo bez sebemensich problemu. Vse
trvalo asi 15 minut.

fbsd# uname -a
FreeBSD fbsd.dell-lab.uw.cz 7.0-RELEASE FreeBSD 7.0-RELEASE #0: Sun
Feb 24 19:59:52 UTC 2008
root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386

fbsd# dmesg
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
       The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-RELEASE #0: Sun Feb 24 19:59:52 UTC 2008
   root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(R) CPU            5130  @ 2.00GHz (1995.01-MHz 686-class CPU)
 Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,SSSE3,CX16,xTPR,PDCM,DCA>
 AMD Features=0x20100000<NX,LM>
 AMD Features2=0x1<LAHF>
 Cores per package: 2
real memory  = 2147123200 (2047 MB)
avail memory = 2091581440 (1994 MB)
ACPI APIC Table: <DELL   PE_SC3  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic2: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 192-215 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
hptrr: HPT RocketRAID controller driver v1.1 (Feb 24 2008 19:59:27)
acpi0: <DELL PE_SC3> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci4
pci5: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci5
pci6: <PCI bus> on pcib4
bce0: <Broadcom NetXtreme II BCM5708 1000Base-SX (B1)> mem
0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci6
miibus0: <MII bus> on bce0
brgphy0: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus0
brgphy0:  1000baseSX-FDX, auto
bce0: Ethernet address: 00:15:c5:e4:2f:a8
bce0: [ITHREAD]
bce0: ASIC (0x57081011); Rev (B1); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x01080005); Flags( MFW MSI )
pcib5: <ACPI PCI-PCI bridge> at device 1.0 on pci4
pci7: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci3
pci8: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci9: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci10: <ACPI PCI bus> on pcib8
pci10: <serial bus, Fibre Channel> at device 0.0 (no driver attached)
pci10: <serial bus, Fibre Channel> at device 0.1 (no driver attached)
pcib9: <PCI-PCI bridge> at device 5.0 on pci0
pci11: <PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci12: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci13: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 0.0 on pci13
pci14: <ACPI PCI bus> on pcib12
mpt0: <LSILogic SAS/SATA Adapter> port 0xdc00-0xdcff mem
0xfc4fc000-0xfc4fffff,0xfc4e0000-0xfc4effff irq 192 at device 8.0 on
pci14
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.12.0
mpt0: mpt_cam_event: 0x16
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x12
mpt0: mpt_cam_event: 0x16
pcib13: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib13
pcib14: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib14
bce1: <Broadcom NetXtreme II BCM5708 1000Base-SX (B1)> mem
0xf8000000-0xf9ffffff irq 16 at device 0.0 on pci2
miibus1: <MII bus> on bce1
brgphy1: <BCM5708S 1000/2500BaseSX PHY> PHY 2 on miibus1
brgphy1:  1000baseSX-FDX, auto
bce1: Ethernet address: 00:15:c5:e4:2f:a6
bce1: [ITHREAD]
bce1: ASIC (0x57081011); Rev (B1); Bus (PCI-X, 64-bit, 133MHz); F/W
(0x01080005); Flags( MFW MSI )
uhci0: <Intel 631XESB/632XESB/3100 USB controller USB-1> port
0xbce0-0xbcff irq 21 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 631XESB/632XESB/3100 USB controller USB-1> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 631XESB/632XESB/3100 USB controller USB-2> port
0xbcc0-0xbcdf irq 20 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 631XESB/632XESB/3100 USB controller USB-2> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 63XXESB USB 2.0 controller> mem 0xfc800000-0xfc8003ff
irq 21 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 63XXESB USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib15: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci15: <ACPI PCI bus> on pcib15
vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem
0xd8000000-0xdfffffff,0xfc1f0000-0xfc1fffff irq 19 at device 13.0 on
pci15
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc8fff,0xc9000-0xc97ff,0xec000-0xeffff pnpid ORM0000 on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
umass0: <Avocent Remote HID device, class 0/0, rev 1.10/1.00, addr 2> on uhub0
umass1: <Avocent Remote HID device, class 0/0, rev 1.10/1.00, addr 2> on uhub0
Timecounters tick every 1.000 msec
hptrr: no controller detected.
da0 at mpt0 bus 0 target 0 lun 0
da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing Enabled
da0: 34332MB (70311936 512 byte sectors: 255H 63S/T 4376C)
ses0 at mpt0 bus 0 target 8 lun 0
ses0: <DP BACKPLANE 1.00> Fixed Enclosure Services SCSI-5 device
ses0: 300.000MB/s transfers
ses0: SCSI-3 SES Device
SMP: AP CPU #1 Launched!
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <Avocent Virtual Floppy 1.00> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at umass-sim1 bus 1 target 0 lun 0
cd0: <Avocent Virtual CD/DVD 1.00> Removable CD-ROM SCSI-0 device
cd0: 1.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/da0s1a

>  Ta chybajuca cache ma mrzi, lebo na pridelenie diskoveho pola to zatial
>  (v dohladnej dobe) nevyzera.
>  Btw, je lepsie (v tomto pripade) pouzivat HW alebo SW mirror ?  Ake su
>  skusenosti ?
>

Urcite HW mirror. I kdyz to neni nejlepsi radic na svete, tak je to
IMHO mnohem lepsi varianta nez softwarovy RAID.

Jeste zkusim rozchodit podporu zjistovani stavu radice - RAID
kontajneru. Nekde jsem se docetl, ze by to uz melo fungovat, takze ted
kdyz mam FreeBSD nainstalovane na fyzickem hardwaru (vetsinou uz se
pohybuju na virtualnich serverech ;-) ), tak je idealni prilezitost to
vyzkouset.

>
>
>  Diky,
>
>  Martin
>

David.