Vypalování

[Kaminar]

Zdravim,

potreboval bych poradit s vypalovanim pod FreeBSD. Bohuzel musim
smutne konstatovat, ze se mi pod FreeBSD jeste nepovedlo vypalit ani
jedno CD nebo DVD, aniz by s tim nebyl nejaky problem. Nakonec jsem
vetsinou skoncil na nejakem Windows, kde vse probehlo bez problemu. Na
Internetu jsem nenalezl zadne narky, ze by pod FreeBSD byly nejake
vyrazne problemy s vypalovanim, a tak to prisuzuji necemu, co jsem asi
prehledl.

Popisu nektere problemy, se kterymi jsem se setkal. Ve vypalovani se
zase tak moc nevyznam a tak jsem sel cestou nejmensiho odporu pomoci
frontendu K3B nebo xcdroast. Vse jsem nastavil tak, jak je popsano v
navodu "sysutils/k3b/pkg-message".


Sestava: IBM TPR52 Vypalovacka: MATSHITA DVD-RAM UJ-830S 1.02 FreeBSD
R6.1 k3b-1.0_1 xcdroast-0.98.a.15_6 cdparanoia-3.9.8_8 cdrdao-1.2.1
cdrtools-2.01_5


1) Pri vypalovani na DVD-RW se datova cast pali bez problemu (i kdyz
k3b ukazuje, ze pali rychlosti 2x misto nastavene max. 4x - tezko
rict, jaka je skutecna rychlost paleni). Po vypaleni dat, se vsak
objevi hlaska, ze se vyprazdnuje cache a to trva asi 6minut a to i
presto, ze jsem napriklad palil jen 20MB, jejichz vypaleni trvalo par
sekund. Po tech 6-ti minutach, kdy se konecne dokonci cely proces
vypalovani, se zda byt vse v poradku vypalene. Pri vypalovani pod
Windows (na jinem pocitaci, ale na stejne medium) se tento problem
neprojevuje.

2) Vlozil jsem CD-RW Verbatim do mechaniky a k3b i xcdroast se tvaril,
ze v mechanice neni vlozeno zadne CD. Opet pod Win nebyl zadny
problem.

3) Na jinem pocitaci, kde mam vypalovacku Sony CD-RW vypalovani na
CD-R skonci s chybou (viz vypis 1). Jinak se ale CD zda byt citelne a
pouzitelne. Vypalovano pomoci xcdroast. Opet na Win nebyl problem a to
ani pri vypalovani na stejnem pocitaci.

4) Pri vypalovani na CD-RW (opet na te vypalovacce Sony) odmitne
vypalovat. Viz vypis 2.


Tak ted, prosim, poradte, co by mohlo pomoci vyresit tyto problemy s
vypalovanim.

Za vsechny rady predem dik
Karel


----------------------------------------------------------------------
Vypis 1:

Calling: /usr/local/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "1,0,0" gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo speed=52 -dao -eject -pad -data "/tmp/ubuntu-7.10-desktop-i386.iso" ...

scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (i386-unknown-freebsd6.0) Copyright (C) 1995-2004 Jorg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree,noforcespeed'
atapi: 0
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'SONY    '
Identifikation : 'CD-RW  CRX225E  '
Revision       : 'QYB2'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1422080 = 1388 KB
FIFO size      : 4194304 = 4096 KB
pregap1: -1
Track 01: data   695 MB         padsize:   30 KB
Total size:      799 MB (79:10.25) = 356269 sectors
Lout start:      799 MB (79:12/19) = 356269 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in:  -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type:    Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks remaining: 3579
Forcespeed is OFF.
Starting to write CD/DVD at speed 40 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
cdrecord: Input/output error. read track info: scsi sendcmd: retryable error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0A 00 00 00 00 08 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.001s timeout 240s
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0

Track 01: writing  30 KB of pad data.
Track 01: Total bytes read/written: 729608192/729638912 (356269 sectors).
Writing  time:  175.971s
Average write speed  28.2x.
Min drive buffer fill was 94%
Fixating...
Fixating time:    2.341s
BURN-Free was never needed.
cdrecord: fifo had 11493 puts and 11493 gets.
cdrecord: fifo was 0 times empty and 6869 times full, min fill was 90%.


----------------------------------------------------------------------
Vypis 2.

Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.004s timeout 240s
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 27 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x27 Qual 0x00 (write protected) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.153s timeout 200s
Writing pregap for track 1 at -150
cdrecord: Input/output error. read buffer cap: scsi sendcmd: retryable error
write track pad data: error after 0 bytes
CDB:  5C 00 00 00 00 00 00 00 0C 00
Starting new track at sector: 0
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x04 Qual 0x08 (logical unit not ready, long write in progress) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.319s timeout 200s
cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.030s timeout 200s
cdrecord: The current problem looks like a buffer underrun.
cdrecord: It looks like 'driveropts=burnfree' does not work for this drive.
cdrecord: Please report.
cdrecord: Make sure that you are root, enable DMA and check your HW/OS set up.

write track data: error after 0 bytes
Writing  time:    6.910s
Average write speed 690.5x.
Fixating...
Fixating time:    0.002s
BURN-Free was never needed.
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.