Jak kontrolovat stav raidu
Jiri Mikulas
konfer at mikulas.com
Thu Jul 19 09:59:09 CEST 2007
Cau
mam tento raid
ciss0: <HP Smart Array 6i> port 0x5000-0x50ff mem
0xf7ef0000-0xf7ef1fff,0xf7e80000-0xf7ebffff irq 24 at device 4.0 on pci2
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 1 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 69459MB (142253280 512 byte sectors: 255H 32S/T 17433C)
nedavno jsem to take resil a nasel jsem tenhle scriptik a malinko
upravil (pouziva camcontrol)
http://bsd.mikulas.com/ciss-check
guli
Petr Macek napsal(a):
> Zdravim vsechny,
> mam server, ktery ma hw raid. Chtel bych kontrolovat stav toho pole a
> disku. Zkousel jsem hledat na www, ale ne moc uspesne. Jedna se o nejaky
> starsi HP server, bohuzel jsem daleko od nej, tak presny typ nevim.
> Orezal jsem /var/run/dmesg.boot, poradi nekdo, zda ato jde a pripadne
> jak kontrolovat stav?
>
> Diky moc
>
> .....
> ciss0: <HP Smart Array 641> port 0x3000-0x30ff mem
> 0xf7ff0000-0xf7ff1fff,0xf7f80000-0xf7fbffff irq 15 at device 1.0 on pci2
> ciss0: [GIANT-LOCKED]
> .....
> Waiting 5 seconds for SCSI devices to settle
> sa0 at ahc1 bus 0 target 6 lun 0
> sa0: <COMPAQ SDX-400C 3.0D> Removable Sequential Access SCSI-2 device
> sa0: 40.000MB/s transfers (20.000MHz, offset 7, 16bit)
> da0 at ciss0 bus 0 target 0 lun 0
> da0: <COMPAQ RAID 5 VOLUME OK> Fixed Direct Access SCSI-0 device
> da0: 135.168MB/s transfers
> da0: 104183MB (213367680 512 byte sectors: 255H 32S/T 26148C)
> Trying to mount root from ufs:/dev/da0s1a
More information about the Users-l
mailing list