adaptec controller

[Robert Popelka]

nech sa paci.

hostb0 at pci0:0:0:    class=0x060000 card=0x81891043 chip=0x27788086
rev=0x81 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = 'Server Memory Controller Hub'
    class    = bridge
    subclass = HOST-PCI
pcib1 at pci0:28:0:    class=0x060400 card=0x00000040 chip=0x27d08086
rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib3 at pci0:28:4:    class=0x060400 card=0x00000040 chip=0x27e08086
rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801GR/GH/GHM (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
pcib4 at pci0:28:5:    class=0x060400 card=0x00000040 chip=0x27e28086
rev=0x01 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801GR/GH/GHM (ICH7 Family) PCI Express Root Port'
    class    = bridge
    subclass = PCI-PCI
none0 at pci0:29:0:    class=0x0c0300 card=0x81901043 chip=0x27c88086
rev=0x01 hdr=0x00
    vendor   = 'Intel CoFreeBSD backup.yegon.sk 6.2-PRERELEASE FreeBSD
6.2-PRERELEASE #1: Fri Jan 12 17:10:08 CET 2007    
root at backup.yegon.sk:/usr/obj/usr/src/sys/kernelconf  i386
rporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
none1 at pci0:29:1:    class=0x0c0300 card=0x81901043 chip=0x27c98086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB Universal Host Controller'
    class    = serial bus
    subclass = USB
none2 at pci0:29:7:    class=0x0c0320 card=0x81901043 chip=0x27cc8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
    class    = serial bus
    subclass = USB
pcib5 at pci0:30:0:    class=0x060401 card=0x00000050 chip=0x244e8086
rev=0xe1 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BA/CA/DB/DBL/EB/ER/FB (ICH2/3/4/4/5/5/6), 6300ESB
Hub Interface to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
isab0 at pci0:31:0:    class=0x060100 card=0x81901043 chip=0x27b88086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GB/GR (ICH7 Family) LPC Interface Controller'
    class    = bridge
    subclass = PCI-ISA
atapci0 at pci0:31:2:    class=0x01018a card=0x819e1043 chip=0x27c08086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller'
    class    = mass storage
    subclass = ATA
none3 at pci0:31:3:    class=0x0c0500 card=0x81901043 chip=0x27da8086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801G (ICH7 Family) SMBus Controller'
    class    = serial bus
    subclass = SMBus
pcib2 at pci1:0:0:    class=0x060400 card=0x00000044 chip=0x032c8086
rev=0x09 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '6702PXH PCI Express-to-PCI Express Bridge'
    class    = bridge
    subclass = PCI-PCI
aacu0 at pci2:2:0:    class=0x010400 card=0x029b9005 chip=0x02869005
rev=0x02 hdr=0x00
    vendor   = 'Adaptec Inc'
    device   = 'AAC-RAID (Rocket)'
    class    = mass storage
    subclass = RAID
bge0 at pci3:0:0:    class=0x020000 card=0x81491043 chip=0x165914e4
rev=0x21 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express'
    class    = network
    subclass = ethernet
bge1 at pci4:0:0:    class=0x020000 card=0x81491043 chip=0x165914e4
rev=0x21 hdr=0x00
    vendor   = 'Broadcom Corporation'
    device   = 'BCM5750A1 NetXtreme Gigabit Ethernet PCI Express'
    class    = network
    subclass = ethernet
none4 at pci5:2:0:    class=0x030000 card=0x812b1043 chip=0x47521002
rev=0x27 hdr=0x00
    vendor   = 'ATI Technologies Inc'
    device   = 'Rage XL PCI'
    class    = display
    subclass = VGA


###
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
aacu0: <Adaptec SATA RAID 2820SA> mem
0xfc600000-0xfc7fffff,0xfc5ff000-0xfc5fffff irq 28 at device 2.0 on pci2
aacu0: New comm. interface enabled
aacu0: Adaptec Raid Controller 2.0.1-1
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
bge0: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfc8f0000-0xfc8fffff
irq 16 at device 0.0 on pci3
miibus0: <MII bus> on bge0
brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: Ethernet address: 00:18:f3:53:67:7f
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom BCM5750 C1, ASIC rev. 0x4201> mem 0xfc9f0000-0xfc9fffff
irq 17 at device 0.0 on pci4
miibus1: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: Ethernet address: 00:18:f3:53:67:80
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcd7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v4.1.13 initialized.  Default = pass all, Logging = enabled
ad0: 381554MB <Seagate ST3400832AS 3.06> at ata0-master SATA150
ad2: 286168MB <Seagate ST3300622AS 3.AAH> at ata1-master SATA150
ad3: 78167MB <Maxtor 6V080E0 VA111680> at ata1-slave SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad3s1a
Loading configuration files.
Entropy harvesting:
 interrupts
 ethernet
 point_to_point
 kickstart
.
swapon: adding /dev/ad3s1b as swap device
Starting file system checks:
/dev/ad3s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad3s1a: clean, 5340888 free (30216 frags, 663834 blocks, 0.4%
fragmentation)
/dev/ad3s2d: DEFER FOR BACKGROUND CHECKING
/dev/ad2s1d: DEFER FOR BACKGROUND CHECKING
Mounting local file systems:
WARNING: /home was not properly dismounted
mount:
/dev/aacdu0s1d
:
No such file or directory

###
FreeBSD backup.yegon.sk 6.2-PRERELEASE FreeBSD 6.2-PRERELEASE #1: Fri
Jan 12 17:10:08 CET 2007    
root at backup.lan:/usr/obj/usr/src/sys/kernelconf  i386

----------------- 
Robert Popelka (jimy)

mail : jimy at kick.sk
tel. : +421 915 770 987
icq  : 120 614 660
irc  : irc.kick.sk #talk



Martin Salac wrote:
> Robert Popelka wrote:
>   
>> zdravim,
>> mam mensi problem s adaptec hw raidom. Spravil som si raid5 z 8 diskov
>> ... pole sa  vytvorilo cez bios utilitu co ma samostatna raid karta.
>>     
>
> :-)
>
> ... predbehnu Dana:
>
> * pciconf -lv
> * dmesg -a
> * uname -a
>
> ... bez toho senehnem dal.
>
> Zdravi
>
> Martin
>