AnyDATA ADU-E100H

Jan Dušátko dusatko at e-apollo.cz
Fri Mar 10 18:56:34 CET 2006


Vitej do klubu ;o)) Tohle uz se snazim vyresit nekolik tydnu a zatim se mi
vubec nedari ;o)))

-----Original Message-----
From: users-l-bounces at freebsd.cz [mailto:users-l-bounces at freebsd.cz] On
Behalf Of Ondra Holecek
Sent: Friday, March 10, 2006 5:27 PM
To: users-l at freebsd.cz
Subject: AnyDATA ADU-E100H


ahoj,

potebuju na FreeBSD nastavit tenhle cdma modem, delam to uplne stejne 
jako v tomhle prispevku kdyz se nastavoval ten pvni cdma euroteli modem: 
http://www.freebsd.cz/listserv/archive/users-l/2004-August/010714.html

jenom jsem do /usr/src/sys/dev/usb/usbdevs pridal tohle

vendor ANYDATA    0x16d5   AnyDATA Corporation
/* AnyDATA CDMA products */
product ANYDATA ADU_E100H   0x6501  ADU-E100H

a do usb_quirks.c tohle (to s +)

  { USB_VENDOR_YAMAHA, USB_PRODUCT_YAMAHA_RTW65I,
    ANY, { UQ_ASSUME_CM_OVER_DATA }},

+ { USB_VENDOR_ANYDATA, USB_PRODUCT_ANYDATA_ADU_E100H,
+   ANY, { UQ_ASSUME_CM_OVER_DATA }},

  { USB_VENDOR_QUALCOMM, USB_PRODUCT_QUALCOMM_CDMA_MSM,
    ANY, { UQ_ASSUME_CM_OVER_DATA }},
  { USB_VENDOR_QUALCOMM2, USB_PRODUCT_QUALCOMM2_CDMA_MSM,
    ANY, { UQ_ASSUME_CM_OVER_DATA }},
  { USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_AS64LX,
    0x100, { UQ_ASSUME_CM_OVER_DATA }},
  { 0, 0, 0, { 0 } }

v puvodnim prispevku, autor jeste vola:

cd /usr/src/sys/dev/usb && make -f Makefile.usbdevs

co v u me v 6.0-RELEASE neni (ono to ostatne neni ani v 5.4-RELEASE jak 
jsem tak koukal), ale pan Google tvrdi ze si to udelaj skripty pri 
kompilaci sami, ale nejak se mi to nezda. :(

kazdopadne, porad ten modem po pripojeni vidim jen jako ugen
ugen0: AnyDATA Corporation AnyDATA CDMA Products, rev 1.10/0.00, addr 2


kdyby to pomohlo, tak tohle je vypis pri sysctl hw.usb.debug=1

usbd_new_device bus=0xc1979000 port=2 depth=1 speed=2
usbd_new_device: adding unit addr=2, rev=110, class=0, subclass=0, 
protocol=0, maxpacket=64, len=18, speed=2
usbd_find_quirk 0x16d5/0x6501/0: 4096
usbd_new_device: new dev (addr 2), dev=0xc2244900, parent=0xc198bd80
usbd_probe_and_attach: trying device specific drivers
usbd_probe_and_attach: no device specific driver found
usbd_probe_and_attach: looping over 1 configurations
usbd_set_config_index: (addr 1) cno=2 attr=0xa0, selfpowered=0, power=500
usbd_set_config_index: set config 1
usbd_probe_and_attach: no interface drivers found
ugen0: AnyDATA Corporation AnyDATA CDMA Products, rev 1.10/0.00, addr 2
usbd_set_config_index: free old config
usbd_set_config_index: (addr 1) cno=2 attr=0xa0, selfpowered=0, power=500
usbd_set_config_index: set config 1


dal uz opravdu nevim jak to resit, imho by to takhle melo vytvorit ucom 
a popripade treba nefungovat, nebo dat alespon neco vedet :(


tohle jsou relevantni radky z myho kernel konfu:

device   ucom
device   umodem
device   uftdi
options  USB_DEBUG

device      uhci     # UHCI PCI->USB interface
device      ohci     # OHCI PCI->USB interface
device      ehci     # EHCI PCI->USB interface (USB 2.0)
device      usb      # USB Bus (required)
#device     udbp     # USB Double Bulk Pipe devices
device      ugen     # Generic
device      uhid     # "Human Interface Devices"
device      ukbd     # Keyboard
device      ulpt     # Printer
device      umass    # Disks/Mass storage - Requires scbus and da
device      ums      # Mouse
device      ural     # Ralink Technology RT2500USB wireless NICs
device      urio     # Diamond Rio 500 MP3 player
device      uscanner # Scanners


Ondra
-- 
FreeBSD mailing list (users-l at freebsd.cz)
http://www.freebsd.cz/listserv/listinfo/users-l





More information about the Users-l mailing list