amilo Pro v2040 AD1986A

[Lucie Lukesova]

Dobry den panove,
nedavno jsme si koupili notebook Amilo Pro v2040 od Fujitsu-Siemens.
Bracha tam nainstaloval FreeBSD 6.1-PRERELEASE.
Vsechno by bylo v pohode kdyby nam jeste fungovala zvukova karta
(sound codec chip ADI IC CODEC AD1986A).

Na internetu jsem nasla navod:
http://rootshell.be/~vaidab/data/laptop.html

Ale nevim si s tim rady. Pise se tam, ze mam pouzit port azalia z NetBSD:
http://www.freebsd.org/projects/ideas/#p-hda


Mohl by mi nekto poradit jak mam zkompilovat ten port ?

Zkousela jsem jednotlive soubory azalia.c, azalia.h, azalia_codec.c
nakopirovat do /usr/src/sys/dev/pci/ a pak make buildworld,
make kernel KERNCONF=LULU, make instalworld...
Ale zvukovka se ve vypisu dmesg neobjevila.

Dale prikladam vypis ze systemu.
Dik.

Lucie

less /boot/loader.conf
--
snd_driver_load="YES"
snd_ich_load="YES"
snd_pcm_load="YES"
--

kernel:
--
#SOUND
device sound
device snd_ich
--

pciconf -vl
--
none1 at pci0:27:0: class=0x040300 card=0x201717c0 chip=0x26688086 rev=0x04 hdr=0x00
    vendor = 'Intel Corporation'
    device = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
    class = multimedia
--

scanpci -vp
--
pci bus 0x0000 cardnum 0x1b function 0x00: vendor 0x8086 device 0x2668
 Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller
 CardVendor 0x17c0 card 0x2017 (Wistron Corp., Card unknown)
  STATUS 0x0010 COMMAND 0x0006
  CLASS 0x04 0x03 0x00 REVISION 0x04
  BIST 0x00 HEADER 0x00 LATENCY 0x00 CACHE 0x08
  BASE0 0x00000000b0000004 addr 0x00000000b0000000 MEM 64BIT
  MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x10
  BYTE_0 0x03 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
--

less /var/run/dmesg.boot
--
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #0: Fri Mar 3 17:30:35 CET 2006
    lulu at home.icm.cz:/usr/obj/usr/src/sys/LULU
ACPI APIC Table: <INTEL ALVISO >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.60GHz (1596.01-MHz 686-class CPU)
  Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
  Features2=0x180<EST,TM2>
real memory = 527302656 (502 MB)
avail memory = 506630144 (483 MB)
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kqemu version 0x00010200
kqemu: KQEMU installed, max_instances=4 max_locked_mem=63276kB.
ath_hal: 0.9.16.16 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD Wistron> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807 mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0040000-0xb007ffff irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib1
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1820-0x183f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1840-0x185f irq 17 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1860-0x187f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1880-0x189f irq 19 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xb0004000-0xb00043ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib2
pci6: <network> at device 5.0 (no driver attached)
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x3000-0x30ff mem 0xb8007000-0xb80070ff irq 20 at device 7.0 on pci6
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0b:e4:aa:4b:21
cbb0: <PCI-CardBus Bridge> mem 0xb8008000-0xb8008fff irq 22 at device 9.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
fwohci0: <1394 Open Host Controller Interface> mem 0xb8007800-0xb8007fff,0xb8000000-0xb8003fff irq 22 at device 9.2 on pci6
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 05:e4:0a:00:32:02:10:25
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 06:e4:0a:02:10:25
fwe0: Ethernet address: 06:e4:0a:02:10:25
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0x18c8-0x18cf,0x18c0-0x18c3,0x18a8-0x18af,0x180c-0x180f,0x18b0-0x18bf mem 0xb0004400-0xb00047ff irq 17 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ichsmb0: <SMBus controller> port 0x18e0-0x18ff irq 17 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xce7ff,0xdc000-0xdffff,0xe0000-0xe3fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: vendor 0x05d5 ABBAHOME, rev 1.10/1.01, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Genius NetScroll+Mini Traveler, rev 1.10/1.07, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
Timecounter "TSC" frequency 1596010031 Hz quality 800
Timecounters tick every 1.000 msec
ath0: <Atheros 5212> mem 0xb8010000-0xb801ffff irq 22 at device 0.0 on cardbus0
ath0: Ethernet address: 00:0b:6b:20:31:23
ath0: mac 5.9 phy 4.3 radio 3.6
acd0: DVDR <NEC DVD+/-RW ND-6650A/1.42> at ata0-master UDMA33
ad4: 57231MB <SAMSUNG HM060II YB100-04> at ata2-master SATA150
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD+-RW ND-6650A 1.42> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
--