Problem s PCMCIA sitovkou na 5.4-RELEASE

Martin Salac salac at certicon.cz
Mon Feb 20 15:38:23 CET 2006


Zdravim vespolek.

mam drobny problem s PCMCIA sitovkou. Kvuli kompatibilite se starou
16ti bit pccard sbernici jsem zvolil SMC 8041TX sitovku (castecne take
kvuli referencim od linuxaru - pod Linuxem pry bezproblemova).
Sitovka vadna neni, overeno na Windows.
Pod FreeBSD 5.4-RELEASE-p11 by mela byt zprovoznitelna pod ed(4)
driverem (pouzivam if_ed.ko modul) .
Kdyz sitovku zasunu do slotu, kernel ji nahlasi jako:
pccard0: <unknown card> (manufacturer=0x01bf, product=0x8041) at function 0
pccard0:    CIS info: SMC, 8041TX-10/100-PC-Card-V2,

V /sys/dev/pccard/pccarddevs je jmenovana jako:
product SMC 8041                { "SMC", "8041TX-10/100-PC-Card-V2",
NULL, NULL } SMC 8041TX 10/100 PC Card

Trosku jsem googlil a zjistil jsem, ze pokud pouzivam devfs, tak
zarizeni se tuni pres nej a stary pccardd je vyrazen z provozu, resp.
pri rucnim pokusu o start mi skonci s:
       pccardd[818]: fatal error: no PC-CARD slots
viz.:
pixla# pccardc dumpcis
0 slots found


Mohl by me prosim nekdo nakopnout, co jsem prehledl, aby mi sitovku
system poznal?

V /dev se mi nevytvari card0 zarizeni. Sitovka by mela byt plne
podporovana, ale devfs k ni nevytvori zarizeni.

Diky za pripadne odpovedi

Zdravi

Martin

P.S. Notebook - Dell Latitude D600.
P.P.S. Omlouvam se za osekany vypisy, ale mail bez cekani na
moderatorsky souhlas muze byt do konfery jen 10 kilo, tak aby se to
veslo. :-)

-------------------------------kldstat---------------------------------
pixla# kldstat
Id Refs Address    Size     Name
 1   31 0xc0400000 44f02c   kernel
 2    2 0xc0850000 b7f8     ntfs.ko
 3    1 0xc085c000 f64c     if_ed.ko
 4    1 0xc086c000 5de4     snd_ich.ko
 5    1 0xc0872000 bb34     ng_ubt.ko
 6    1 0xc087e000 1d6c     ntfs_iconv.ko
 7    5 0xc0880000 49dc     libiconv.ko
 8    1 0xc0885000 1db0     msdosfs_iconv.ko
 9    1 0xc0887000 a8dc     if_ipw.ko
10   14 0xc0892000 5d270    acpi.ko
11    1 0xc1da5000 6000     linprocfs.ko
12    2 0xc1dae000 19000    linux.ko
13    1 0xc1f60000 2000     rtc.ko



-----------------------------vysek z kernelu----------------------------

# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device          cbb             # cardbus (yenta) bridge
device          pccard          # PC Card (16-bit) bus
device          cardbus         # CardBus (32-bit) bus



------------------------------vysek z  pciconf-------------------------

pixla# pciconf -lv

pcib1 at pci0:1:0: class=0x060400 card=0x00000000 chip=0x33418086 rev=0x03
hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82855PM Odem AGP Bridge'
    class    = bridge
    subclass = PCI-PCI
pcib2 at pci0:30:0:        class=0x060400 card=0x00000000 chip=0x24488086
rev=0x81 hdr=0x01
    vendor   = 'Intel Corporation'
    device   = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
    class    = bridge
    subclass = PCI-PCI
none0 at pci0:31:6:        class=0x070300 card=0x542214f1 chip=0x24c68086
rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
    class    = simple comms
    subclass = generic modem
cbb0 at pci2:1:0:  class=0x060700 card=0x011d1028 chip=0x71131217 rev=0x20
hdr=0x02
    vendor   = 'O2 Micro Inc'
    device   = 'OZ711EC1 SmartCardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
cbb1 at pci2:1:1:  class=0x060700 card=0x011d1028 chip=0x71131217 rev=0x20
hdr=0x02
    vendor   = 'O2 Micro Inc'
    device   = 'OZ711EC1 SmartCardBus Controller'
    class    = bridge
    subclass = PCI-CardBus


------------------------------vysek z devinfo--------------------------

pixla# devinfo -v
pcib2 pnpinfo vendor=0x8086 device=0x2448 subvendor=0x0000
subdevice=0x0000 class=0x060400 at slot=30 function=0 handle=\_SB_.PCI0.PCIE
          pci2
            bge0 pnpinfo vendor=0x14e4 device=0x16a6 subvendor=0x1028
subdevice=0x8126 class=0x020000 at slot=0 function=0
              miibus0
                brgphy0
            cbb0 pnpinfo vendor=0x1217 device=0x7113 subvendor=0x1028
subdevice=0x011d class=0x060700 at slot=1 function=0
handle=\_SB_.PCI0.PCIE.CRD0
              cardbus0
              pccard0
                unknown pnpinfo manufacturer=0x01bf product=0x8041
cisvendor="SMC" cisproduct="8041TX-10/100-PC-Card-V2" function_type=6 at
function=0
            cbb1 pnpinfo vendor=0x1217 device=0x7113 subvendor=0x1028
subdevice=0x011d class=0x060700 at slot=1 function=1
handle=\_SB_.PCI0.PCIE.CRD1
              cardbus1
              pccard1
                unknown pnpinfo manufacturer=0xffff product=0x0001
cisvendor="O2Micro" cisproduct="SmartCardBus Reader" function_type=-1 at
function=0
            ipw0 pnpinfo vendor=0x8086 device=0x1043 subvendor=0x8086
subdevice=0x2561 class=0x028000 at slot=3 function=0


-------------------------------vysek z dmesg---------------------------

pixla# dmesg

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p11 #4: Mon Feb 20 13:18:17 CET 2006
    root at doma.cz:/usr/obj/usr/src/sys/KERNPCMCIA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1600MHz (1594.83-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x695  Stepping = 5

Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory  = 536543232 (511 MB)
avail memory = 515371008 (491 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R  > on motherboard
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.LNKB has invalid initial irq 11, ignoring
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
...
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
miibus0: <MII bus> on bge0
cbb0: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <O2Micro OZ711E1 PCI-CardBus Bridge> at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
....
acd0: CDRW <Samsung CD-RW/DVD-ROM SN-324B/U102> at ata1-master PIO4
pccard1: <unknown card> (manufacturer=0xffff, product=0x0001) at function 0
pccard1:    CIS info: O2Micro, SmartCardBus Reader, V1.0
pccard0: <unknown card> (manufacturer=0x01bf, product=0x8041) at function 0
pccard0:    CIS info: SMC, 8041TX-10/100-PC-Card-V2,
info: [drm] Loading R200 Microcode



More information about the Users-l mailing list