CDMA
honzin
honzim at seznam.cz
Sat Jul 9 12:55:10 CEST 2005
Zdravim,
modem se mi detekuje pri startu diky tomuto navodu http://www.freebsd.cz/listserv/archive/users-l/2004-August/010714.html, viz dmesg.boot. Ale jakmile spustim #ppp, dial cdma, viz ppp.conf, nahlasi Warning: deflink: Unable to set physical to speed 0, viz ppp.log. A to stejne mi to nahlasi i kdyz spustim ppp v interaktivnim rezimu... set device /dev/ucom0, set speed 921600, term, a nic.. nemuzu zadavat AT prikazy a po chvilce to nahlasi taky Warning: deflink: Unable to set physical to speed 0.
Muzete nekdo poradit?
Klimes
/var/log/ppp.log
Jul 9 12:11:21 freebsd ppp[572]: Phase: Using interface: tun0
Jul 9 12:11:21 freebsd ppp[572]: Phase: deflink: Created in closed state
Jul 9 12:11:21 freebsd ppp[572]: Phase: PPP Started (interactive mode).
Jul 9 12:11:23 freebsd ppp[572]: Phase: bundle: Establish
Jul 9 12:11:23 freebsd ppp[572]: Phase: deflink: closed -> opening
Jul 9 12:11:24 freebsd ppp[572]: Phase: deflink: Connected!
Jul 9 12:11:24 freebsd ppp[572]: Phase: deflink: opening -> dial
Jul 9 12:11:31 freebsd ppp[572]: Warning: Chat script failed
Jul 9 12:11:31 freebsd ppp[572]: Phase: deflink: dial -> hangup
Jul 9 12:11:31 freebsd ppp[572]: Warning: deflink: Unable to set physical to sp
eed 0
Jul 9 12:11:31 freebsd ppp[572]: Phase: deflink: Disconnected!
Jul 9 12:11:31 freebsd ppp[572]: Warning: deflink: Unable to set physical to sp
eed 0
Jul 9 12:11:32 freebsd ppp[572]: Phase: deflink: Connect time: 8 secs: 0 octets
in, 0 octets out
Jul 9 12:11:32 freebsd ppp[572]: Phase: deflink: 0 packets in, 0 packets out
Jul 9 12:11:32 freebsd ppp[572]: Phase: total 0 bytes/sec, peak 0 bytes/sec on
Sat Jul 9 12:11:24 2005
Jul 9 12:11:32 freebsd ppp[572]: Phase: deflink: hangup -> closed
Jul 9 12:11:32 freebsd ppp[572]: Phase: bundle: Dead
Jul 9 12:11:46 freebsd ppp[572]: Phase: PPP Terminated (normal).
/var/run/dmesg.boot
FreeBSD 5.2.1-RELEASE #5: Sat Jul 9 11:31:05 CEST 2005
honzin at freebsd.wisp.local:/usr/src/sys/i386/compile/ROUTER
Preloaded elf kernel "/boot/kernel/kernel" at 0xc074f000.
Preloaded elf module "/boot/kernel/umodem.ko" at 0xc074f1f4.
Preloaded elf module "/boot/kernel/ucom.ko" at 0xc074f2a0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc074f34c.
..
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11 at de
vice 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ucom0: Qualcomm, Incorporated Qualcomm CDMA Technologies MSM, rev 1.01/0.00, add
r 2, iclass 2/2
ucom0: data interface 1, has CM over data, has break
ucom0: status change notification available
/etc/ppp/ppp.conf
default:
set log local Phase LCP IPCP
ident user-ppp VERSION (built 13.5.2005)
set ctsrts off
set device /dev/ucom0
set speed 921600
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \"\" AT OK-AT-OK \\dATDT\\T TIMEOUT 40 CONNECT"
cdma:
set phone #777
set authname 601******@eurotel.cz
set authkey ******
set login "TIMEOUT 10 \"\" \"\" gin:--gin: \\U word: \\P col: ppp"
More information about the Users-l
mailing list