hardware pro server na amd64
David Komanek
xdavid at lib-eth.natur.cuni.cz
Tue Apr 19 17:50:17 CEST 2005
Dobry den,
snazim se zorientovat v problematice hardwaru pro FreeBSD na adm64. Rad
bych vybral dualni desku pro opterona s vhodnym chipsetem. Pokud bude na
desce rovnou i funkcni Gb ethernet, tim lepe, ale neni podminkou, kartu
muzu koupit zvlast. Stejne tak nepozaduji SCSI na desce, domnivam se, ze
mi plne vyhovi Adaptec RAID 2130SLP, (pripadne 2230SLP - pouziva to
stejny ovladac, ze ?). Idealni by bylo, abych vzal bootovaci CD freeBSD
aktualni verze a rovnou jej nainstaloval na RAID 5 za uvedenym radicem,
bez nutnosti pouzivat nejake berlicky v podobe SATA nebo PATA disku.
Postupne jsem ruznymi lidmi zrazovan od vsech moznych desek, az mne jeden
ochotny clovek odkazal na tuto konferenci. Jake dualni desky pro opteron
jsou vhodne ?
Diky,
David Komanek
P.S.: prikladam jeste muj puvodni dotaz do jine konference na toto tema
:-)
---------- Forwarded message ----------
Date: Tue, 19 Apr 2005 11:19:18 +0200 (CEST)
From: David Komanek <xdavid at lib-eth.natur.cuni.cz>
To: freebsd-amd64 at freebsd.org
Subject: designing new freebsd server for amd64 arch
Hi all,
I am trying to design new machine for FreeBSD running on amd64 platform. I
already read officially supported hardware list as well as many discussions
concerning hardware for FreeBSD. Still I am not quite sure, what motherboard to
choose. I need dual opteron motherboard, which covers (or can be extended by
add-on cards) 2x Gb ethernet networking device and scsi raid 5. I read that
FreeBSD has problems with asus and msi motherboards, so I decided to use some
tyan board. Those with integrated ZCR Adaptec seem to me to be also
problematic. What do you suggest based on your experience ?
Now I prefer:
Tyan Thunder K8WE, S2895A2NRF
2x AMD Opteron 250 Box
Adaptec 2130SLP
4x Hitachi 3.5" 73.4 GB (SCSI Ultra 320),10 000 rpm
HP DLT 40/80
2x Gb LAN - I plan use the on-board ones
but I am not sure whether
- motherboard's nForce chipsets are well supported on amd64 port of FreeBSD
- I can install directly to RAID 5 behind the Adaptec 2130SLP and boot from it
without the need of installing on a separate SATA drive (or even old ATA ?)
- is it possible to attach the HP DLT drive to the same SCSI controller as the
RAID5-configured disks ?
- how strong power supply should I use for this or similar configuration ? (I
expect at least 500W, but what is your experience)
Maybe you will suggest to use completely another motherboard - I am open to it
too.
Thanks in advance,
David Komanek
Charles University in Prague
Prague, CZ
More information about the Users-l
mailing list