Neco divneho pri startu

[Milan Vician]

Toto sa stalo aj mne a pomohlo mi, ked som prehodil kabel
na radici na iny konektor.

Milan

----- Original Message ----- 
From: "Zbynek Burget" <zburget at miastudio.cz>
To: "FreeBSD mailing list" <users-l at freebsd.cz>
Sent: Tuesday, March 08, 2005 7:16 AM
Subject: Neco divneho pri startu


> Zdravim vespolek,
> 
> ...vim, ze zvoleny subject asi neni idealni, ale nic lepsiho mne 
> nenapadlo ;-)
> 
> Na jednom prastarem routeru - 486 EISA - se mi, po prekompilovani jadra, 
> pri startu systemu zacalo dit tohle (cast vypisu dmesg):
> 
> 
> FreeBSD 4.10-RELEASE-p3 #4: Sun Mar  6 22:42:00 CET 2005
> <---snip--->
> DUMMYNET initialized (011031)
> Waiting 10 seconds for SCSI devices to settle
> ahc0: Recovery Initiated
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> ahc0: Dumping Card State while idle, at SEQADDR 0x168
> Card was paused
> ACCUM = 0x10, SINDEX = 0x44, DINDEX = 0x88, ARG_2 = 0x4
> HCNT = 0x0 SCBPTR = 0x0
> SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]
> SCSISEQ[0x12] SBLKCTL[0x8] SCSIRATE[0x0] SEQCTL[0x10]
> SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0]
> SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x0]
> DFCNTRL[0x0] DFSTATUS[0x2d]
> STACK: 0x171 0x11 0x0 0x14f
> SCB count = 20
> Kernel NEXTQSCB = 0
> Card NEXTQSCB = 16
> QINFIFO entries: 16 15 19
> Waiting Queue entries:
> Disconnected Queue entries:
> QOUTFIFO entries:
> Sequencer Free SCB List: 1 2 3
> Sequencer SCB Info:
>   0 SCB_CONTROL[0x0] SCB_SCSIID[0xd7] SCB_LUN[0x0] SCB_TAG[0xff]
>   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> Pending list:
>  15 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
>  16 SCB_CONTROL[0x0] SCB_SCSIID[0xe7] SCB_LUN[0x0]
>  19 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x80]
> Kernel Free SCB list: 17 18 8 9 1 2 3 4 5 6 7 14 13 12 11 10
> Untagged Q(0): 15
> Untagged Q(1): 19
> Untagged Q(14): 16
> 
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (probe1:ahc0:0:1:0): SCB 0x13 - timed out
> sg[0] - Addr 0x50e0 : Length 32
> (probe1:ahc0:0:1:0): SCB 19: Immediate reset.  Flags = 0x628
> (probe1:ahc0:0:1:0): no longer in timeout, status = 34c
> ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
> Infinite interrupt loop, INTSTAT = 70ahc0: Timedout SCBs already 
> complete. Interrupts may not be functioning.
> ahc0: Recovery Initiated
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> ahc0: Dumping Card State while idle, at SEQADDR 0x16b
> Card was paused
> ACCUM = 0x4, SINDEX = 0x45, DINDEX = 0x89, ARG_2 = 0x4
> HCNT = 0x0 SCBPTR = 0x0
> SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]
> SCSISEQ[0x12] SBLKCTL[0x8] SCSIRATE[0x0] SEQCTL[0x10]
> SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0]
> SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x0]
> DFCNTRL[0x0] DFSTATUS[0x2d]
> STACK: 0x171 0x11 0x0 0x14f
> SCB count = 20
> Kernel NEXTQSCB = 15
> Card NEXTQSCB = 16
> QINFIFO entries: 16 19
> Waiting Queue entries:
> Disconnected Queue entries:
> QOUTFIFO entries:
> Sequencer Free SCB List: 1 2 3
> Sequencer SCB Info:
>   0 SCB_CONTROL[0x0] SCB_SCSIID[0xe7] SCB_LUN[0x0] SCB_TAG[0xff]
>   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> Pending list:
>  19 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x80]
>  16 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0]
> Kernel Free SCB list: 0 17 18 8 9 1 2 3 4 5 6 7 14 13 12 11 10
> Untagged Q(0): 16
> Untagged Q(1): 19
> 
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (probe0:ahc0:0:0:0): SCB 0x10 - timed out
> sg[0] - Addr 0x1f18700 : Length 20
> (probe0:ahc0:0:0:0): SCB 16: Immediate reset.  Flags = 0x620
> (probe0:ahc0:0:0:0): no longer in timeout, status = 35b
> ahc0: Issued Channel A Bus Reset. 2 SCBs aborted
> Infinite interrupt loop, INTSTAT = 70ahc0: Timedout SCBs already 
> complete. Interrupts may not be functioning.
> ahc0: Recovery Initiated
> >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> ahc0: Dumping Card State while idle, at SEQADDR 0x16b
> Card was paused
> ACCUM = 0x4, SINDEX = 0x45, DINDEX = 0x89, ARG_2 = 0x4
> HCNT = 0x0 SCBPTR = 0x0
> SCSISIGI[0x0] ERROR[0x0] SCSIBUSL[0x0] LASTPHASE[0x1]
> SCSISEQ[0x12] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]
> SEQ_FLAGS[0xc0] SSTAT0[0x5] SSTAT1[0x0] SSTAT2[0x0]
> SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xa4] SXFRCTL0[0x0]
> DFCNTRL[0x0] DFSTATUS[0x2d]
> STACK: 0x171 0x11 0x0 0x14f
> SCB count = 20
> Kernel NEXTQSCB = 16
> Card NEXTQSCB = 19
> QINFIFO entries: 19
> Waiting Queue entries:
> Disconnected Queue entries:
> QOUTFIFO entries:
> Sequencer Free SCB List: 1 2 3
> Sequencer SCB Info:
>   0 SCB_CONTROL[0x0] SCB_SCSIID[0x7] SCB_LUN[0x0] SCB_TAG[0xff]
>   1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
>   3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> Pending list:
>  19 SCB_CONTROL[0x0] SCB_SCSIID[0x17] SCB_LUN[0x80]
> Kernel Free SCB list: 15 0 17 18 8 9 1 2 3 4 5 6 7 14 13 12 11 10
> Untagged Q(1): 19
> 
> <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> (probe1:ahc0:0:1:0): SCB 0x13 - timed out
> sg[0] - Addr 0x1e99200 : Length 255
> (probe1:ahc0:0:1:0): SCB 19: Immediate reset.  Flags = 0x620
> (probe1:ahc0:0:1:0): no longer in timeout, status = 35b
> ahc0: Issued Channel A Bus Reset. 1 SCBs aborted
> Infinite interrupt loop, INTSTAT = 70ahc0: Timedout SCBs already 
> complete. Interrupts may not be functioning.
> Mounting root from ufs:/dev/da0s1a
> da0 at ahc0 bus 0 target 0 lun 0
> da0: <SEAGATE ST32550N 0016> Fixed Direct Access SCSI-2 device
> da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
> da0: 2047MB (4194058 512 byte sectors: 64H 32S/T 2047C)
> cd0 at ahc0 bus 0 target 1 lun 0
> cd0: <SONY CD-ROM CDU-76S 1.1c> Removable CD-ROM SCSI-2 device
> cd0: 4.901MB/s transfers (4.901MHz, offset 15)
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> 
> 
> 
> Pak system normalne nabehne.
> Netusite nekdo, co to znamena?
> 
> Zbynek Burget
> 
> -- 
> FreeBSD mailing list (users-l at freebsd.cz)
> http://www.freebsd.cz/listserv/listinfo/users-l