TV karta

Martin Salač salac at certicon.cz
Thu Aug 19 13:18:48 CEST 2004


Zdravim vespolek.

Chtel bych se zeptat, zda tu nekdo nema zkusenosti s kartou ATI TV 
Wonder PCI.
Mela by to byt klasicka Bt878 karta detekovana ovladacem bktr().
System ji najde a zda se, ze si s ni i rozumi, ale klientske programy mi
zobrazi stale cernou obrazovku (xawtv) nebo rozmazany obraz (fxtv) s 
divokymi
barvami (skoro jako by byla spatne norma) a bez zvuku.
Google mi poradil par stranek, vcetne patche na bktr, ktery by mel tuto 
kartu
"privest k zivotu zcela" (pravda - jeste jsem nezkousel).

Chtel bych se zeptat:
- Funguje nekomu tato karta bez jakehokoli patchovani?
- Kde bych mohl mit chybu?
- Nemel by nekdo nejaky tip co bych mohl jeste zkusit?

Diky za pripadne odpovedi

Zdravi

Martin

--------------------------------------------

HW: MB s CPU Athlon a chipsetem VIA KT266.
        VGA nVidia 4200Ti
OS: FreeBSD 4.10-RELEASE-p2 (cvsup 12.8.2004, stejne tak porty))
dmesg, pciconf a kernel prilozen:

chovani karty:

pokud je v kernelu:
device          iicsmb          # smb over i2c bridge
device          iicbus          # Bus support, required for 
ic/iic/iicsmb below.
device          iicbbdevice          iicsmb          # smb over i2c bridge
device          iicbus          # Bus support, required for 
ic/iic/iicsmb below.
device          iicbb
device          ic
device          iic
device          bktr
device          smbus
options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
options         BKTR_NO_MSP_RESET
options         BKTR_GPIO_ACCESS
options         BKTR_SIS_VIA_MODE
options         OVERRIDE_CARD=1
options         OVERRIDE_TUNER=5
options         OVERRIDE_MSP=1
options         OVERRIDE_DBX=1

tak se karta v dmesg jevi takhle:
bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 5 at device 7.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
iic1: <I2C general purpose I/O> on iicbus1
smbus2: <System Management Bus> on bti2c0
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Pinnacle/Miro TV, Philips PAL tuner, dbx stereo, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 7.1 irq 5
pcm0: <Creative EMU10K1> port 0xe400-0xe41f irq 5 at device 8.0 on pci0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>

pokud je v kernelu jenom tohle:
device          iicsmb          # smb over i2c bridge
device          iicbus          # Bus support, required for 
ic/iic/iicsmb below.
device          iicbbdevice          iicsmb          # smb over i2c bridge
device          iicbus          # Bus support, required for 
ic/iic/iicsmb below.
device          iicbb
device          ic
device          iic
device          bktr
device          smbus
options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL

vypada dmesg takhle:
bktr0: <BrookTree 878> mem 0xdddfe000-0xdddfefff irq 5 at device 7.0 on pci0
iicbb0: <I2C bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
iic0: <I2C general purpose I/O> on iicbus0
iicbus1: <Philips I2C bus> on iicbb0 master-only
iicsmb1: <I2C to SMB bridge> on iicbus1
smbus1: <System Management Bus> on iicsmb1
iic1: <I2C general purpose I/O> on iicbus1
smbus2: <System Management Bus> on bti2c0
bktr0: Detected a MSP3415D-B3 at 0x80
bktr0: Pinnacle/Miro TV, TEMIC NTSC tuner, msp3400c stereo.
pci0: <unknown card> (vendor=0x109e, dev=0x0878) at 7.1 irq 5

pciconf -lv
bktr0 at pci0:7:0: class=0x040000 card=0x00011002 chip=0x036e109e rev=0x02 
hdr=0x00
     vendor   = 'Brooktree Corporation'
     device   = 'Bt878 MediaStream Controller'
     class    = multimedia
     subclass = video
none0 at pci0:7:1: class=0x048000 card=0x00011002 chip=0x0878109e rev=0x02 
hdr=0x00
     vendor   = 'Brooktree Corporation'
     device   = 'Bt878/Fusion878A Video Capture (Audio Section)'
     class    = multimedia




More information about the Users-l mailing list