problem s NATem

[Scoobie Ray]

Dekuji za pomoc.
Cyba byla trivialni - kdyz jsem prepisoval nastaveni z handbooku tak jsem to oprask i s zarizenim sitove karty, kterou samozrejme nemam, takze mi to nejelo. 

-----Original Message-----
From: TomА  KrАl, "Ing."<tomas.kral at kr-moravskoslezsky.cz>
To: FreeBSD mailing list <users-l at freebsd.cz>
Date: Wed, 04 Aug 2004 10:03:12 +0200
Subject: Re: problem s NATem

> 
> Zdravim,
> 
> ja mam na jednom z FBSD routeru v /etc/rc.conf:
> ...
> gateway_enable="YES"
> firewall_enable="YES"
> firewall_script="/etc/xxx.yyy"
> firewall_logging="YES"
> natd_enable="YES"
> natd_interface="xl0"
> natd_flags="-s -u -f /etc/natd.conf"
> ...
> 
> a v /etc/natd.conf:
> 
> same_ports yes
> use_sockets yes
> redirect_address aaa.bbb.ccc.ddd eee.fff.ggg.hhh
> 
> snad to pomuze
> ToKR.
> 
> 
> On Wed, 2004-08-04 at 08:35, Scoobie Ray wrote:
> 
> > Dobry den!
> > Mam pocitac, ketry je napojen na internet - bezi na nem FreeBSD 5.2.1 a potrebuji jeste na nej napojit pocitas s Linuxem pres NAT. Nakonfiguroval jsem jadro dle handbooku nasledovne:
> > #Network Address Translation (NAT)
> > options         IPFIREWALL
> > options         IPDIVERT
> > options         IPFIREWALL_DEFAULT_TO_ACCEPT
> > options         IPFIREWALL_VERBOSE
> > 
> > Do /etc/rc.conf jsem pridal tyto radky:
> > gateway_enable="YES"            # Set to YES if this host will be a gateway.
> > mrouted_enable="NO"             # Do multicast routing (see /etc/mrouted.conf).
> > firewall_enable="YES"           # Enables the firewall rules in /etc/rc.firewall at boot.
> > firewall_type="OPEN"            # This specifies a predefined firewall ruleset that allows anything in. See /etc/rc.firewall for additional types.
> > natd_enable="YES"                                                                                                                
> > natd_interface="fxp0"           # Indicates which interface to forward packets through (the interface connected to the Internet).
> > natd_flags="-redirect_address 192.168.254.1 147.32.122.196"
> > arpproxy_all=""                 # replaces obsolete kernel option ARP_PROXYALL.
> > 
> > Linuxovy stroj ma IP 192.168.254.2
> > Po restertu pocitace dle dmesg ipfirawall nabehne, ale natd v pameti neni. Zarizeni fxp0 taky nikde neni.
> > 
> > Jestlize spustim natd takto:
> > natd -a 192.168.254.1 -t 147.32.122.196 -redirect_address 192.168.254.1 147.32.122.196
> > Natd nabehne, ale stejne chybi natd_interface.
> > Kdyz jsem dal tuto radku do /etc/rc.conf do natd_flags natd opet nenabehl.
> > 
> > Muzete mi s tim, prosim, pomoci?
> > Dekuji za napady.
> -- 
> FreeBSD mailing list (users-l at freebsd.cz)
> http://www.freebsd.cz/listserv/listinfo/users-l
>