ZVUK - SB PCI 128
xeo at email.cz
xeo at email.cz
Thu Jul 15 17:24:06 CEST 2004
1) ano
2 + 3) Sem uplny zacatecnik... takze nevim... jak to mam zjistit?
4) Tady to je
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3526c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1200MHz (1235.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268349440 (255 MB)
avail memory = 251027456 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS TUSL2-C > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f13a0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 5
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTC is routed to irq 9
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 11 INTA is routed to irq 9
pcib2: slot 12 INTA is routed to irq 9
pcib2: slot 13 INTA is routed to irq 9
pci2: <simple comms> at device 11.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xee000000-0xee0000ff irq 9 at device 12.0 on pci2
rl0: Ethernet address: 00:50:fc:e4:71:5a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia, audio> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1100.1.1> PRINTER MLC,PCL,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1235987732 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2dcd960
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
acd0: CDRW <TEAC CD-W552E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: INCORRECT BLOCK COUNT I=169536 (16 should be 0) (CORRECTED)
/dev/ad0s1a: INCORRECT BLOCK COUNT I=290934 (4 should be 0) (CORRECTED)
/dev/ad0s1a: INCORRECT BLOCK COUNT I=612352 (4 should be 0) (CORRECTED)
/dev/ad0s1a: UNREF FILE I=47112 OWNER=root MODE=100600
/dev/ad0s1a: SIZE=0 MTIME=Jul 15 17:19 2004 (CLEARED)
/dev/ad0s1a: UNREF FILE I=169536 OWNER=root MODE=100644
/dev/ad0s1a: SIZE=0 MTIME=Jul 15 17:19 2004 (CLEARED)
/dev/ad0s1a: LINK COUNT FILE I=169830 OWNER=root MODE=100644
/dev/ad0s1a: SIZE=6658 MTIME=Jul 15 17:19 2004 COUNT 2 SHOULD BE 1 (ADJUSTED)
/dev/ad0s1a: ZERO LENGTH DIR I=612352 OWNER=root MODE=41777
/dev/ad0s1a: SIZE=0 MTIME=Jul 15 17:19 2004 (CLEARED)
/dev/ad0s1a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
/dev/ad0s1a: SUMMARY INFORMATION BAD (SALVAGED)
/dev/ad0s1a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
/dev/ad0s1a: 157922 files, 636688 used, 2164311 free (32751 frags, 266445 blocks, 1.2% fragmentation)
Setting hostname: pokoj.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
Starting dhclient.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::250:fcff:fee4:715a%rl0 prefixlen 64 scopeid 0x1
inet 192.168.2.102 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:50:fc:e4:71:5a
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Additional routing options:
.
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
Jul 15 17:20:52 pokoj syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
linux
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Thu Jul 15 17:20:56 CEST 2004
Shutting down daemon processes:
.
Stopping cron.
Shutting down local daemons:
.
Writing entropy file:
.
Terminated
.
Jul 15 17:20:58 pokoj syslogd: exiting on signal 15
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks, buffers remaining...
done
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a3526c.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(TM) CPU 1200MHz (1235.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268349440 (255 MB)
avail memory = 251027456 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS TUSL2-C > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00f13a0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 31 INTD is routed to irq 5
pcib0: slot 31 INTB is routed to irq 10
pcib0: slot 31 INTC is routed to irq 9
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 0 INTA is routed to irq 11
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 11 INTA is routed to irq 9
pcib2: slot 12 INTA is routed to irq 9
pcib2: slot 13 INTA is routed to irq 9
pci2: <simple comms> at device 11.0 (no driver attached)
rl0: <RealTek 8139 10/100BaseTX> port 0xb400-0xb4ff mem 0xee000000-0xee0000ff irq 9 at device 12.0 on pci2
rl0: Ethernet address: 00:50:fc:e4:71:5a
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <multimedia, audio> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH2 UDMA100 controller> port 0xa800-0xa80f at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xa400-0xa41f irq 5 at device 31.2 on pci0
usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Microsoft Microsoft IntelliMouse\M-. Optical, rev 1.10/1.21, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xa000-0xa01f irq 9 at device 31.4 on pci0
usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Hewlett-Packard HP LaserJet 1100.1.1> PRINTER MLC,PCL,PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xcc000-0xcffff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1235988056 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc2dcd960
ad0: 76319MB <ST380021A> [155061/16/63] at ata0-master UDMA100
acd0: CDRW <TEAC CD-W552E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
.
swapon: adding /dev/ad0s1b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 2164311 free (32751 frags, 266445 blocks, 1.2% fragmentation)
Setting hostname: pokoj.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
Starting dhclient.
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::250:fcff:fee4:715a%rl0 prefixlen 64 scopeid 0x1
inet 192.168.2.102 netmask 0xffffff00 broadcast 192.168.2.255
ether 00:50:fc:e4:71:5a
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
Additional routing options:
.
hw.bus.devctl_disable:
0
->
1
Mounting NFS file systems:
.
Starting syslogd.
Jul 15 17:21:37 pokoj syslogd: kernel boot file is /boot/kernel/kernel
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting usbd.
Starting local daemons:
.
Updating motd
.
Configuring syscons:
blanktime
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
linux
.
Starting cron.
Local package initialization:
.
Additional TCP options:
.
Starting background file system checks in 60 seconds.
Thu Jul 15 17:21:41 CEST 2004
Jul 15 17:21:44 pokoj login: ROOT LOGIN (root) ON ttyv0
drm0: <ATI Radeon QW RV200 7500> port 0xd800-0xd8ff mem 0xef000000-0xef00ffff,0xf0000000-0xf7ffffff irq 11 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
drm0: [MPSAFE]
> --- Původní zpráva ---
> Od: Michal Varga <varga at stonehenge.sk>
> Datum: 15.07.2004 12:34:13
>
> 1/ Pouzivas GENERIC kernel?
> 2/ Pokud ne, mas v custom kernelu "device pcm"?
> 3/ Pokud ne, mas naloadovany kernel modul snd_pcm.ko?
> 4/ Pokud porad nepomaha, muzes sem poslat vypis `dmesg -a`?
>
> m.
>
> On Thu, 2004-07-15 at 12:05, xeo at email.cz wrote:
> > Nazdar,
> > sem teprv v unixu zacatecnik... nainstaloval sem si freebsd 5.2.1. po mensich problemech se mi podarilo vse nastavit az na zvuk... stale se mi jej nedari rozjet... uz sem vcera celej den hledal jak na to, ale furt nic... :(
> >
> >
> > V komplu zvukovku SB 128 PCI (CT4700) a vzdy pri nabihani KDE mi to hodi hlasku:
> > Error while initializing sound driver: /dev/dsp can't be opened (No such file or directory) The sound server will continue, using null output device.
> >
> > Nevite nekdo co s tim? da se tahle zvukovka vubec v bsd rozjet???
> > diky
> >
> --
> Michal Varga <varga at stonehenge.sk>
> Stonehenge
>
> --
> FreeBSD mailing list (users-l at freebsd.cz)
> http://www.freebsd.cz/listserv/listinfo/users-l
>
________________________________________________________________________________
OBCHODNÍ-DŮM.cz: domácí spotřebiče a elektronika za nízké ceny, s pohodlnou dopravou až do domu, klidně i večer. Objednávky i telefonicky.
www.OBCHODNI-DUM.cz
More information about the Users-l
mailing list