Opet GPRS

Zbynek Houska zbynh at seznam.cz
Fri Oct 10 21:53:01 CEST 2003
Previous message: dodatek k háčku
Next message: Opet GPRS
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Vazeni uzivatele,

chci se zeptat tech co pouzivaji gprs na jejich nazor na propustnost.
Mam tu nekolik problemu:

Pokud se zdarne pripojim a netstat -r mi ukaze, ze gateway je ok, t.j.
smerem na gprs, tak se stane, ze ke mne nic neleze. Spojeni je, ale
vypada jako by melo nulovou aktivitu...a to i presto, ze posilam
pozadavky ven.

Dale pak dneska se mi prihodila tato vec. Nelze navazat spojeni.
Viz vypis, prikladam. Objevuje se tam ono MAGICNUM.
Mohl by mi nekdo poradit?

Zbynek

-- 
It is forbidden to kill; therefore all murderers are punished unless they kill 
in large numbers and to the sound of trumpets. 
-Voltaire, "War" 
-------------- next part --------------
Script started on Fri Oct 10 20:52:07 2003
root at skippy# ppp ETNonstop
Working in interactive mode
Using interface: tun0
tun0: Command: default: set device /dev/cuaa0
tun0: Command: default: set speed 115200
tun0: Command: default: set dial ABORT BUSY ABORT NO\sCARRIER ABORT NO\sDIALTONE             TIMEOUT 20             "" AT OK-AT-OK             AT+CEER OK-AT+CPIN=2790-OK-AT-OK             AT+CGDCONT=1,IP,\T OK            \dATDT*99***1# CONNECT
tun0: Command: default: set hangup "" AT+CEER OK
tun0: Command: default: set timeout 60
tun0: Command: default: disable lqr
tun0: Command: default: set server 3000 ********
tun0: Phase: Listening at port 3000.
tun0: Command: ETNonstop: set phone internet
tun0: Command: ETNonstop: set authname USERNAME
tun0: Command: ETNonstop: set authkey ********
tun0: Command: ETNonstop: set ifaddr 0/0 192.168.254.254/0 255.255.255.0 0.0.0.0
tun0: Command: ETNonstop: nat enable yes
tun0: Command: ETNonstop: disable iface-alias
tun0: Command: ETNonstop: enable proxy
tun0: Command: ETNonstop: nat deny_incoming no
tun0: Command: ETNonstop: nat same_ports yes
tun0: Command: ETNonstop: nat use_sockets yes
tun0: Command: ETNonstop: add default HISADDR
tun0: Command: ETNonstop: set filter dial 0 permit 0 0
tun0: Command: ETNonstop: set filter alive 0 permit 0/0 0/0
tun0: Command: ETNonstop: set accmap 0x000a0000
tun0: Command: ETNonstop: disable deflate pred1 vjcomp
tun0: Command: ETNonstop: set timeout 0
tun0: Phase: PPP Started (interactive mode).
ppp ON skippy> dial
tun0: Command: /dev/tty: dial
tun0: Phase: bundle: Establish
tun0: Phase: deflink: closed -> opening
tun0: Phase: deflink: Connected!
tun0: Phase: deflink: opening -> dial
tun0: Chat: Phone: internet
tun0: Chat: deflink: Dial attempt 1 of 1
ppp ON skippy> tun0: Chat: Send: AT
tun0: Chat: Expect(20): OK
tun0: Chat: Received: AT
tun0: Chat: Received: OK
tun0: Chat: Send: AT+CEER
tun0: Chat: Expect(20): OK
tun0: Chat: Received: AT+CEER
tun0: Chat: Received: +CEER: 243,1,0
tun0: Chat: Received: 
tun0: Chat: Received: OK
tun0: Chat: Send: AT+CGDCONT=1,IP,internet
tun0: Chat: Expect(20): OK
tun0: Chat: Received: AT+CGDCONT=1,IP,internet
tun0: Chat: Received: OK
tun0: Chat: Send: ATDT*99***1#
tun0: Chat: Expect(20): CONNECT
tun0: Chat: Received: ATDT*99***1#
tun0: Chat: Received: CONNECT
tun0: Phase: deflink: dial -> carrier
tun0: Phase: deflink: /dev/cuaa0: CD detected
tun0: Phase: deflink: carrier -> login
tun0: Phase: deflink: login -> lcp
tun0: LCP: FSM: Using "deflink" as a transport
tun0: LCP: deflink: State change Initial --> Closed
tun0: LCP: deflink: State change Closed --> Stopped
tun0: LCP: deflink: RecvConfigReq(3) state = Stopped
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigReq(1) state = Stopped
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  MRU[4] 1500
tun0: LCP:  MAGICNUM[6] 0x6979380f
tun0: LCP: deflink: SendConfigAck(3) state = Stopped
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: LayerStart
tun0: LCP: deflink: State change Stopped --> Ack-Sent
tun0: LCP: deflink: RecvConfigReq(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigAck(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  MRU[4] 1500
tun0: LCP:  MAGICNUM[6] 0x6979380f
tun0: LCP: deflink: RecvConfigReq(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigAck(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  MRU[4] 1500
tun0: LCP:  MAGICNUM[6] 0x6979380f
tun0: LCP: deflink: RecvConfigReq(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigAck(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  MRU[4] 1500
tun0: LCP:  MAGICNUM[6] 0x6979380f
tun0: LCP: deflink: RecvConfigReq(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigAck(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigReq(1) state = Ack-Sent
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  MRU[4] 1500
tun0: LCP:  MAGICNUM[6] 0x6979380f
tun0: LCP: deflink: RecvConfigReq(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: SendConfigAck(3) state = Ack-Sent
tun0: LCP:  ACCMAP[6] 0x000a0000
tun0: LCP:  PROTOCOMP[2]
tun0: LCP:  ACFCOMP[2]
tun0: LCP:  MAGICNUM[6] 0xe1821320
tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
tun0: LCP: deflink: LayerFinish
tun0: LCP: deflink: State change Ack-Sent --> Stopped
tun0: LCP: deflink: State change Stopped --> Closed
tun0: LCP: deflink: State change Closed --> Initial
tun0: Phase: deflink: Disconnected!
tun0: Phase: deflink: lcp -> logout
tun0: Phase: deflink: logout -> hangup
tun0: Phase: deflink: Disconnected!
tun0: Phase: deflink: Connect time: 19 secs: 330 octets in, 605 octets out
tun0: Phase: deflink: 6 packets in, 11 packets out
tun0: Phase:  total 49 bytes/sec, peak 66 bytes/sec on Fri Oct 10 20:52:23 2003
tun0: Phase: deflink: hangup -> closed
tun0: Phase: bundle: Dead
ppp ON skippy> q
tun0: Command: /dev/tty: q
root at skippy# exit
exit

Script done on Fri Oct 10 20:52:39 2003
Previous message: dodatek k háčku
Next message: Opet GPRS
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the Users-l mailing list