Tisk pres Sambu

[mkes at ra.rockwell.com]

Nereknu ti jestli je to primo tohle, ale ...
... Samba tiskne tak, ze ten soubor, ktery ma byt tisten se nejdriv ulozi
do spooleru samby a pak je predhozen daemonu pro tisk, ktery si ho presune
do prislusneho spoolovaciho adresare pro danou tiskarnu a zpracuje. Ten
adresar do ktery slouzi jako spooler pro sambu musi byt pristupny pro
zapis. Nerad bych kecal, ale mam dojem, ze nekde v dokumentaci Samby se
pise ze musi byt "world writeable".
Tohle je moje oblibena chyba, ze na ta prava zapomenu a pak se divim proc
to netiskne.
Takze je treba to zkontrolovat. Spooler je definovan v smb.conf jako 'path'
pro tu danou tiskarnu. Pokud tam nic neni (default) a prekladas sambu z
portu tak se podivej do Makefile, najdi kam ukazuje SAMBA_SPOOL.

Mira




Zbynek Houska <zbynh at seznam.cz>@freebsd.cz on 09/08/2003 06:44:41 PM

Please respond to FreeBSD mailing list <users-l at freebsd.cz>

Sent by:    users-l-bounces at freebsd.cz


To:    FreeBSD mailing list <users-l at freebsd.cz>
cc:
Subject:    Tisk pres Sambu


Dobry den,

mohl by mi nekdo prosim poradit, jak nastavit Sambu aby mohli uzivatele
z Win stanic tisknout? Sambu mam nastavenou, ze na tiskarnu vidim, ale
nemohu se na ni pripojit. Mam zaznam /etc/host.lpd, prava spoolu jsou na
root a daemon. Lpd je spousten pri startu systemu...

V logu Samby mam tohle:

[2003/09/08 17:43:59, 0] smbd/service.c:make_connection(252)
   karkulin (192.168.0.1) couldn't find service
::{2227a280-3aea-1069-a2de-08002b30309d}
[2003/09/08 17:44:59, 0] printing/printing.c:print_job_start(1045)
   print_job_start: insufficient permissions to open spool file
/var/spool/lpd/smbprn.000005.ET2hyL.
[2003/09/08 17:56:48, 0] smbd/service.c:make_connection(252)
   karkulin (192.168.0.1) couldn't find service
::{2227a280-3aea-1069-a2de-08002b30309d}
[2003/09/08 18:27:31, 0] smbd/service.c:make_connection(252)
   karkulin (192.168.0.1) couldn't find service
::{2227a280-3aea-1069-a2de-08002b30309d}
[2003/09/08 18:27:43, 0] printing/printing.c:print_job_start(1045)
   print_job_start: insufficient permissions to open spool file
/var/spool/lpd/smbprn.000006.ssVTjn.
[2003/09/08 18:30:43, 0] smbd/service.c:make_connection(252)
   karkulin (192.168.0.1) couldn't find service
::{2227a280-3aea-1069-a2de-08002b30309d}
[2003/09/08 18:36:16, 0] printing/printing.c:print_job_start(1045)
   print_job_start: insufficient permissions to open spool file
/var/spool/lpd/smbprn.000007.aTC2qf.

W2k tiskarnu vidi jako aktivni, ale nemuze se k ni pripojit, stale chce
instalovat ovladace...

Tady je podstatna cast /etc/printcap:

# APS1_BEGIN:printer1
# - don't delete start label for apsfilter printer1
# - no other printer defines between BEGIN and END LABEL
aps1|ijs/DESKJET_610;r=360x360;q=medium;c=full;p=a4;m=auto:\
     :lp=/dev/lpt0:\
     :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
     :sd=/var/spool/lpd/aps1:\
     :lf=/var/spool/lpd/aps1/log:\
     :af=/var/spool/lpd/aps1/acct:\
     :mx#0:\
     :sh:
# APS1_END - don't delete this

lp v printcap nemam...
Firewall nepouzivam a rad bych aby na tiskarnu mohli tisknout ostatni
uzivatele v siti.

Diky Zbynek

--
FreeBSD mailing list (users-l at freebsd.cz)
 http://www.freebsd.cz/listserv/listinfo/users-l